Vanciet's PCIEX4-1002 is a Cameralink image acquisition card based on PCI Express bus architecture. The card is composed of one FPGA carrier board based on kintex-7 and one multi chip ds90cr288 serial parallel converter input sub card. Using FPGA as the real-time processor, it can realize one channel of full Cameralink image reception. The mapping format of board image can be customized, which can automatically identify the frame rate and resolution of input image. The board has a set of independent 64 bit DDR3 SDRAM, which realizes real-time dynamic high-capacity cache, and pciex4 host interface completes the rapid transmission of image data. The system can be used as the output acquisition and display of image algorithm system.

Technical specifications

Host interface index

Support PCI Express 2.0 specification

PCIE GEN2 X4@5GBPS /LANE

PCIe bidirectional DMA transmission bandwidth: 1.6gbyte/s

Sub card+3.3V/+12V/+vadj power supply, power supply power ≥ 15W

Dynamic storage performance

Storage bandwidth: 64 bits, DDR3 SDRAM 1333mhz

Storage capacity: 2gbyte DDR3 SDRAM

Physical and electrical characteristics

Board size: 106.65 x 174.5mm

Board power supply: 1.5A MAX@+12V (± 5%, excluding power supply to daughter card)

Heat dissipation mode: air cooling

Environmental characteristics

Operating temperature: - 20 ° ~ + 70 ° C

Storage temperature: - 40 ° ~ + 85 ° C

Working humidity: 5% ~ 95%, non condensing

FMC sub card index

Standard FMC (HPC) interface, conforming to vita57 1 specification

Demo program and source code

Support Windows 7 operating system